What makes Kkeut Clinic's Onda Lifting special?

1. Customized Design and Handpiece Utilization Strategy
At Kkeut Clinic, the director personally analyzes each patient's skin condition to create a lifting plan. We carefully examine areas requiring elasticity improvement and contour refinement, allocating 3mm and 7mm handpieces appropriately. Areas prone to hollowing are carefully avoided, while areas needing tightening receive more focused treatment.

2. Sufficient Energy Application
During facial treatments, energy can be adjusted and applied from 60,000 to 120,000 joules. Rather than simply delivering a large amount of energy, we meticulously set the energy levels to match the patient's skin characteristics and treatment goals.

3. Skilled Treatment Speed Control
With Onda equipment, the thermal energy delivered to skin tissue and its effects can vary depending on the handpiece speed. At Kkeut Clinic, we carefully adjust the speed—slower for areas needing heat accumulation and faster for sensitive areas—to maximize treatment effectiveness without unnecessary overheating.

4. Precise Shot Distribution by Area
Beyond simply using 3mm and 7mm handpieces, we precisely divide and apply shots, considering the patient's facial volume and fat distribution. For instance, the 3mm handpiece is primarily used for areas with less fat, while the 7mm handpiece's proportion can be increased for areas with more fat, such as the double chin or lower jawline.

Subtle Differences in Onda Lifting Treatment Methods
Instead of consistently applying a fixed 90W output from the start of Onda Lifting treatment at Kkeut Clinic,
we rapidly raise skin temperature with a high output of 100-110W initially, then maintain it at 90W for the rest of the treatment.

Benefits of Kkeut Clinic's Treatment Approach
Shorter Skin Response Time
Even when delivering the same total energy, starting the treatment with a higher output leads to a quicker rise in tissue temperature.
This shortens the time required to reach the necessary energy accumulation threshold,
and can expedite the onset of the skin's response.

Reduced Energy Loss in Key Response Areas
Delivering high-output energy for a short duration allows the target temperature to be reached before heat disperses to surrounding areas.
This helps induce a thermal response primarily in the dermis and subcutaneous fat layer without stressing the epidermis.

Efficient Treatment Time and Energy Utilization
If treatment were performed solely at 90W, the time to reach the reaction threshold could be longer,
and more shots might be required to elicit a sufficient thermal response.
In contrast, starting with a high output completes the necessary heat delivery in a shorter time,
and then adjusting the output helps maintain stability.

What Patients May Experience
Compared to a 90W standalone treatment method,
you can expect to feel the lifting improvement effects more quickly.
Immediately after the treatment, the sensation of your skin feeling firmer and tighter may be more pronounced.
Furthermore, because the output is adjusted before the heat sensation becomes excessive,
it can also help reduce pain or discomfort during the procedure.

In conclusion, even when using the same 60,000 joules of energy, the treatment results can vary depending on the output control method,
and Kkeut Clinic utilizes this approach for its treatments.

Key Features of Onda Lifting

Expect Simultaneous Lifting and Tightening
Onda Lifting utilizes ultra-high-frequency microwave (2.45GHz) energy. This effectively delivers heat to the dermal and subcutaneous fat layers, making it a new type of lifting device that offers both lifting and tightening improvements.

This device is based on the principle of vibrating water molecules to generate frictional heat. By aiding in collagen contraction and production and influencing fat cells, a key feature is that lifting effects can be felt immediately after the treatment.

Microwaves are selectively absorbed by water in the skin, generating heat. This allows for minimal stimulation to the epidermis while effectively concentrating the necessary energy in the dermis and subcutaneous fat layers.

The Onda device has the advantage of being usable for both lifting and tightening purposes.

얼굴 시술 시 6만에서 12만 줄까지 에너지를 조절하여 적용할 수 있습니다. 단순히 많은 에너지를 조사하기보다, 환자분의 피부 특성과 시술 목표에 맞춰 섬세하게 에너지를 설정해 드립니다.

3. 숙련된 시술 속도 조절

온다 장비는 핸드피스 속도에 따라 피부 조직에 전달되는 열 에너지와 그 효과가 달라질 수 있습니다. 끗 한의원에서는 열 축적이 필요한 곳은 천천히, 민감한 부위는 빠르게 조절하여 불필요한 과열 없이 시술 효과를 높일 수 있도록 노력합니다.

4. 부위별 샷 정밀 분배

단순히 3mm와 7mm 핸드피스를 사용하는 것을 넘어, 환자분의 얼굴 볼륨감과 지방 분포를 고려하여 샷을 정밀하게 나누어 조사합니다. 예를 들어, 지방이 적은 부위에는 3mm 핸드피스를 주로 사용하고, 이중턱이나 하관 지방이 많은 부위에는 7mm 비중을 늘려 적용할 수 있습니다.

온다리프팅 시술 방식의 섬세한 차이

끗 한의원에서는 온다 리프팅 시술 시 처음부터 일정한 90W 출력으로만 진행하는 방식 대신,

초반에 100~110W의 고출력으로 빠르게 피부 온도를 올린 후, 90W로 유지하여 시술합니다.

끗 한의원의 시술 접근 방식이 주는 이점

피부 반응 시점의 단축

동일한 총 에너지를 조사하더라도, 고출력으로 시술을 시작하면 조직 온도가 더 신속하게 상승합니다.

이를 통해 필요한 에너지 누적 구간에 도달하는 시간이 짧아지고,

피부가 반응을 시작하는 시기가 앞당겨질 수 있습니다.

핵심 반응 부위의 에너지 손실 감소

고출력으로 짧은 시간 동안 에너지를 조사하면, 열이 주변으로 분산되기 전에 목표 온도에 도달할 수 있습니다.

이로 인해 표피에 무리를 주지 않으면서 진피 및 피하지방층 중심의 열 반응을 유도하는 데 도움이 됩니다.

효율적인 시술 시간과 에너지 활용

만약 90W로만 시술한다면 반응 구간까지 도달하는 시간이 더 길어질 수 있고,

충분한 열 반응을 이끌어내기 위해 더 많은 샷 수를 조사해야 할 수도 있습니다.

반면, 고출력으로 시작하는 방식은 필요한 열 도달을 짧은 시간 안에 마무리하며,

이후 출력을 조절하여 안정성을 유지하는 데 도움이 될 수 있습니다.

시술받는 분들이 체감할 수 있는 부분

90W 단독 시술 방식과 비교하여

리프팅 개선 효과를 더 빠르게 느끼실 수 있을 것으로 기대됩니다.

시술 직후 피부가 탄탄하게 조여지는 듯한 느낌이 좀 더 명확할 수 있습니다.

또한, 열감이 과도해지기 전에 출력을 조절하기 때문에

시술 중 통증이나 불편감을 줄이는 데도 도움을 드릴 수 있습니다.

결론적으로, 동일한 6만 줄의 에너지를 사용하더라도 출력 조절 방식에 따라

시술 결과는 다르게 나타날 수 있으며,

끗 한의원에서는 이러한 접근법을 통해 시술을 진행합니다.

온다리프팅의 주요 특징

리프팅과 타이트닝을 동시에 기대

온다리프팅은 극초단파 마이크로웨이브(2.45GHz) 에너지를 활용합니다. 이를 통해 진피층과 피하지방층에 열을 효과적으로 전달하여, 리프팅과 타이트닝 개선을 함께 기대해 볼 수 있는 새로운 방식의 리프팅 장비입니다.

이 장비는 수분을 진동시켜 마찰열을 발생시키는 원리를 바탕으로 합니다. 콜라겐의 수축과 생성 과정을 돕고 지방세포에 영향을 주어, 시술 직후에도 리프팅 효과를 느낄 수 있다는 점이 특징입니다.

마이크로웨이브는 피부 속 수분에 선택적으로 흡수되어 열을 생성합니다. 덕분에 표피에는 최소한의 자극을 주면서도, 진피 및 피하지방층에는 필요한 에너지를 집중적으로 전달할 수 있습니다.

온다 장비는 리프팅과 타이트닝 두 가지 목적에 모두 활용될 수 있다는 이점이 있습니다.

If lifting focuses on improving facial contours, tightening primarily aims at skin texture and elasticity. Onda treatment is designed to consider both of these aspects simultaneously.

How Onda Lifting Works

Onda Lifting treatment uses two handpieces: 3mm and 7mm.

3mm handpiece: This handpiece delivers energy to the boundary between the dermis and the subcutaneous fat layer.

When thermal energy is delivered to this depth, it promotes the production of collagen and elastin fibers, and can also help in hyaluronic acid synthesis. Along with the contraction response of existing collagen fibers, immediate skin tightening effects can be expected.

As water in the fat layer decreases due to edema, changes in facial lines can sometimes be observed immediately after the treatment.

7mm handpiece: This handpiece reaches deeper into the subcutaneous fat layer, selectively destroying fat cell membranes to induce cell death.

Damaged fat cells are expelled from the body through lymphatic circulation, which can help improve facial contours. Changes begin to appear 2-3 weeks after the procedure, contour changes can be observed around 4 weeks, and improved appearance can be expected by the 6th week. Since the destroyed fat cells do not regenerate, a longer-lasting effect is an advantage.

During the treatment, retaining ligaments contract immediately, allowing for a rapid lifting effect.

Temperature Control: Collagen contraction is induced when the dermal layer temperature reaches approximately 60-65 degrees Celsius. To effectively achieve this temperature, a treatment technique that involves slowly moving the handpiece to sufficiently accumulate thermal energy is important.

Water-Selective Absorption Principle: Microwave energy has the characteristic of selectively absorbing only water. Thanks to this, it barely stimulates nerves or blood vessels, and heat is concentrated only on the water content in fat cells and the dermal layer. As a result, a lifting treatment with reduced pain and a low possibility of side effects is possible.

Lifting Treatments to Consider Together

Onda Lifting can be performed alone, but better synergy can be expected when combined with procedures like Shurink (targeting the fascia layer) or Oligio (tightening using radiofrequency).

Especially when multiple treatments are received on the same day, the time required for heat accumulation is reduced, increasing treatment convenience and helping to improve satisfaction.

Our Medical Team's Philosophy

We perform Onda Lifting treatments multiple times a day.

However, each individual's lifting design is customized to consider their unique characteristics.

Our medical team continuously researches and considers how to provide even better results after the treatment.

Beyond simply operating equipment, we believe that true lifting involves deeply understanding the characteristics and flow of the skin and delicately designing individual contour changes within that understanding.

The results of Onda Lifting can vary based on the practitioner's skilled technique, beyond just the performance of the device.

The results of such treatments can vary depending on the medical team's experience and expertise.

Onda Lifting's Rapid Changes: What's the Reason?

Onda Lifting utilizes microwave energy to selectively deliver concentrated heat only to depths of 3mm and 7mm within the skin.

As a result, collagen fibers are rapidly heated to temperatures exceeding 65 degrees Celsius, which can lead to an immediate contraction response.

It is possible to visually confirm a certain degree of lifting effect immediately after the treatment.

The need to wait for changes to gradually appear, as is common with typical radiofrequency lifting, can be reduced.

Experiencing immediate firmness and a lifted sensation after treatment is one of Onda Lifting's characteristics.

This treatment can be recommended for those who expect relatively quick changes.

Customized Onda Lifting Treatment Process

1. Precise Pre-Treatment Design and Handpiece Utilization Strategy

We consider establishing a precise design prior to treatment to be important.

Through individual consultation, our medical team comprehensively analyzes skin elasticity, fat distribution, facial volume, and the required lifting direction to plan the treatment area.

Based on this, the 3mm handpiece (primarily for dermal stimulation) and the 7mm handpiece (primarily targeting the fat layer) are applied appropriately according to the characteristics of each area.

Beyond simply performing the treatment mechanically, we pursue strategic lifting based on design.

2. Appropriate Energy Application and Meticulous Treatment Settings

In Onda Lifting, the total amount of energy delivered plays a crucial role.

The amount of energy required for treatment varies for each individual, allowing for customized procedures ranging from 60,000 joules to over 120,000 joules. Accordingly, sufficient treatment time is secured, and cooling strategies to prevent skin overheating are also meticulously planned.

3. Handpiece Speed Control and Heat Accumulation Management

The effectiveness of Onda Lifting can vary depending on how efficiently thermal energy is accumulated in the skin layers.

Initially, we move the handpiece relatively slowly to ensure sufficient heat accumulation. Subsequently, we adjust the speed during the treatment to reduce the risk of skin overheating or burns.

Delicate adjustment of the procedure is based on extensive experience.

4. Customized Handpiece and Shot Strategy Planning

When there is volume or simply a loss of elasticity, it is recommended to apply different shot strategies.

Considering the skin's volume, fat distribution, and thickness, the usage ratio of 3mm and 7mm handpieces is adjusted.

For example, a 7mm tip can primarily be used for the jawline with significant fat accumulation, while a 3mm tip can be utilized around the cheekbones where volume loss is a concern.

We apply a customized distribution strategy for each individual rather than a mechanical irradiation method.

5. Medical Team's Customized Design and Continuous Research

Onda Lifting procedures are enhancing proficiency by handling various cases.

Nevertheless, individual designs always vary.

Beyond consultation hours, the medical team predicts changes in the patient's face and continuously reviews energy settings and handpiece placements that can help with improvement.

With Onda Lifting, the post-procedure results can vary depending on who designs the treatment rather than just the procedure itself.

This is not just a procedure that uses equipment; it's a lifting treatment where the medical team's skilled know-how is crucial.

Recommended for

• 01. Those who want to improve a double chin or jowls, and refine their jawline.
• 02. Those concerned about deep nasolabial folds and facial sagging.
• 03. Those who were not satisfied with previous lifting procedures or continue to have concerns about facial contour and elasticity.
• 04. Individuals aged 30 to 50 experiencing both fat and decreased skin elasticity.
• 05. Those considering a lifting procedure with less concern about pain or recovery time.

Benefits of the Procedure

• 01. Excellent cooling function can reduce pain during the procedure.
• 02. Immediate skin tightening effects can be expected after the procedure.
• 03. Most daily activities are not affected immediately after the procedure.

Procedure Steps

• STEP 01. 1:1 Consultation after Cleansing
• STEP 02. Oil Application
• STEP 03. Onda Lifting Procedure

Post-Procedure Precautions

• ㆍCleansing and makeup are possible even after the procedure.
• ㆍFor about 1 week after the procedure, it is recommended to refrain from visiting saunas or jjimjilbangs, and from consuming alcohol or smoking.
• ㆍIf you feel warmth in the treated area, your skin may become dry, so it is recommended to use plenty of moisturizer.
• ㆍWhen going out, we recommend carefully applying sunscreen to protect your skin from UV rays.